XAV Steering Wheel Control compatibility

General Notes

• Compatibility is only confirmed with the Japanese Car Manufacturing companies listed below 
• Sony recommends using a professional for installation.
• Car manufacturers can change the wiring specifications without notice. Be sure to locate the correct wires before beginning installation.
• Please refer to the operating instructions or contact the manufacturer of your car or car dealer for more information.
• All connections shown in this chart are from the wire side, not the terminal side.
• It is recommended that all car stereo installations be performed by a qualified, professional installer.
• Be sure to connect each lead properly to avoid damage.
• Cover any unused leads with electrical tape for safety.
• Do not connect the cable if you are not using the steering wheel control feature.
• This information is subject to change without notice.

XAV Cable (not supplied) 

Car Wiring Configurations

Manufacturer	Connector Type		Pin Assignment	Notes
Toyota	20P		Input 1:1 Input 2:2 GND = G
	26P		Input 1:1 Input 2:2 GND = G
	28P		Input 1:1 Input 2:2 GND = G
Honda	20P-A		Input 1:1 Input 2: N/C GND = G
	20P-B		Input 1:1 Input 2: N/C GND = G
	24P		Input 1:1 Input 2: N/C GND = G
Nissan	16P-A		Input 1:1 Input 2:2 GND = G
	16P-B		Input 1:1 Input 2:2 GND = G
	20P		Input 1:1 Input 2:2 GND = G
Mitsubishi	20P		Input 1:1 Input 2: N/C GND = G
Mazda	24P		Input 1:1 Input 2: N/C GND = G
Subaru	8P		Input 1:1 Input 2: N/C GND = G
	20P		Input 1:1 Input 2: N/C GND = G
Maruti Suzuki	20P		Input 1:1 Input 2: N/C GND = G