Steering Wheel Control Compatibility for Japanese cars

IMPORTANT: This article applies only to specific products and/or operating systems. Check Applicable Products and Categories for details.

General Notes

• Compatibility is only confirmed with the Japanese Car Manufacturing companies listed below. 
• It is recommended that all car stereo installations be performed by a qualified, professional installer.
• Car manufacturers can change the wiring specifications without notice. Be sure to locate the correct wires before beginning installation.
• Please refer to the operating instructions or contact the manufacturer of your car or car dealer for more information.
• All connections shown in this chart are from the wire side, not the terminal side.
• Be sure to connect each lead properly to avoid damage.
• Cover any unused leads with electrical tape for safety.
• Do not connect the cable if you are not using the steering wheel control feature.
• This information is subject to change without notice.

You need an RC-SR1 (cable) to perform steering wheel remote input.

NOTE:  Purchase RC-SR1 (CONNECTION CABLE(SW)) Parts Number: 1-848-796-11 as a service part.

[2] Input 2 (Red or Brown)
[1] Input 1 (Green)
[G] GND (Black)