How to use the Music Pro app like a pro

Question: Where do I adjust the volume balance on the recording screen? 

Answer:

1. You have to go to the editing screen to adjust the Volume balance.

2. Tap ">>" to expand the window.

3. Slide the volume bar to adjust the volume balance.

4. Tap REC to move back to the recording screen.

Tips: After tapping the volume adjustment bar, you can make fine adjustments by moving left or right.

Question: Where can I delete tracks?

Answer:

1. Tap EDIT to move to the editing screen.

2. Tap “>>“ to expand the window.

3. Tap the three vertical dots to select an option.

4. Tap REC to move back to the recording screen.

Question: How do you edit a track that has already been overwritten? 

                      Set the cursor before singing

                       Overwrite the previous take

1. Move to the edit screen and press the ">" button to expand the overwritten track.

2. The inside of the track is displayed for each take, so tap the overwritten take to select it.

The take is selected, and the section (white shading) is displayed at the left end. Move your selection to the right to arrange it at the end of the previous Take.

Answer 2: Before recording.

Record the tracks separately for each part. By separating the tracks, both sounds are maintained in the overlapping part.

(e.g., Track_1, Track_2)

Question:

When I select and move a take etc., on the edit screen, my finger is in the way, and I cannot move it to the correct position.

                               My finger overlaps the knob.

Answer:

After tapping the editing knob, move your finger down while keeping your finger on the screen so that you can see the editing point, and then move your finger left or right.

By doing so, you can fine-tune the position while looking at the edit point.

Question:

When recording from the middle of the backing track, the playback timing of the recorded sound shifts.

After starting recording from the middle, when playing back, the backing track and the recorded sound are out of sync.

By tapping and sliding left and right, it is difficult to make small movements even if you try to correct the playback position of the recorded sound.

Answer:

1. Tap the waveform you want to move.

2. Tap […] to display the menu.

3. Tap "Move left / Move right" from the menu.

4. You can move with a fine value of ± 5 msec and check the amount of movement with Toast

Question:

The track is accidentally moved due to an unintentional movement during trimming or scaling.

• Trimming: Tap the waveform and move while tapping the knobs (B) on the left and right ends that are displayed.
• Scaling: Pinch in and pinch out with two fingers within the above red frame included on the waveform
• Moving: Move while tapping the inner center (A) of the white selectors (B) on the left and right ends that are displayed by tapping the waveform.

Answer:

There's no lock function that prevents it from moving.

If you cannot restore it with the Undo button (yellow circle), use the same workaround as Tip 5 to restore the incorrect movement.

Question:

What if the waveform returns to its original position when moving it around with my finger? 

Answer:

1. If you move the waveform you want to move more than a certain amount (36dp) after touching it, you can see that the original waveform becomes dark and it is in a movable state.

Note: Applicable to 1.0.0.A.0.39 version or later.

2. After the original waveform is dark, return your finger to a slight position and release it to move it to the released position.